India's Leading Industrial Biomass Systems

High Efficiency. Low Fuel Cost. Fully Automatic.

We design and manufacture advanced Biomass Pellet Burners and Gasifier Systems that reduce fuel costs by up to 40% to 50% compared to diesel, furnace oil, and LPG heaters.

  • Fully Automatic PLC Control System
  • Zero Smoke & Eco-Friendly Operation
  • Low Maintenance & High Mechanical Reliability
  • Perfect for Boiler, Hot Air Generator, and Oven Retrofits
Calculate Savings Get Free Quotation
Biomass Pellet Burner System
Auto Fuel Feeding
Clean Combustion
Smart PLC Panel

Industries Trapped in High-Cost Fossil Fuel Heating

Conventional fossil fuels increase your operating expenses and subject your plant to massive market price fluctuations.

High Fuel Costs

Thermal heating consumes up to 50% of your manufacturing opex. Using diesel, furnace oil, or LPG places a massive, unproductive financial load on your cashflow.

Volatile Price Spikes

Fossil fuel prices are highly volatile and prone to sudden international market spikes. This unpredictability makes long-term pricing and margin forecasting impossible.

Environmental Penalties

Environmental norms are tightening globally. Fossil fuels produce heavy carbon emissions, soot, and smoke, risking pollution fines and compliance closures.

Transition to Smart, Automated Biomass Heating

NDMI biomass systems integrate directly with your existing heating setups, offering the automatic utility of oil burners at half the cost.

Up to 50% Fuel Cost Reduction

Biomass pellets and agricultural briquettes deliver a significantly lower cost-per-Kcal than fossil fuels, slashing bills instantly.

Hands-Free PLC Automation

Equipped with automatic fuel conveying, electric ignition, air-to-fuel ratio controllers, and diagnostic alarms.

Carbon Neutral & Clean Combustion

Biomass is classified as renewable energy. Our burners operate with high-turbulence secondary air, ensuring smokeless and carbon-neutral cycles.

Automatic Pellet Burner Solution

Industrial Biomass Thermal Systems

Heavy-duty manufacturing equipment engineered for extreme duty cycles and high thermal transfers.

01 Biomass Gasifiers
02 Hot Air Generators
03 Pellet Burners

Biomass Producer Gasifiers

Our advanced gasifiers thermochemically convert solid agro-waste/wood chips into clean combustible producer gas. This replaces diesel, LPG, and natural gas in heavy thermal systems.

  • Capacity: 100,000 to 5,000,000 Kcal/hr
  • Automated continuous ash removal
  • High tar-cracking design with clean gas output
Enquire Now
Biomass Gasifier

Solid Fuel Hot Air Generators

Designed for indirect and direct process heating. Incorporates advanced shell-and-tube heat exchangers to deliver fully uncontaminated hot air ideal for food processing, drying, and chemicals.

  • Multi-fuel ready (Wood, Briquettes, Coal, Pellets)
  • Outlet temperature range: Up to 350°C
  • Dual-pass high efficiency thermal exchangers
Enquire Now
Hot Air Generator

Fully Automatic Pellet Burners

A retrofittable burner designed to convert existing oil or gas fired boilers, dryers, and thermic fluid heaters into biomass systems. Brings automation convenience at half the running cost.

  • Fully automatic PLC control with fuel modulations
  • Double-stage back-fire safety mechanisms
  • High grade stainless combustion chamber
Enquire Now
Pellet Burner System

Reliable Thermal Heat Across Sectors

NDMI systems are integrated into key industrial clusters, delivering high stability heat output.

01 Heavy Manufacturing
02 Food & Beverage
03 Textile Processing
04 Chemical & Ceramic
Heavy Manufacturing

Metal Processing & Heavy Engineering

Heavy production systems consume massive thermal values. Our multi-megawatt biomass gasifiers replace expensive LPG and furnace oil in forging furnaces, copper melting, and sheet heating plants.

Save 40% opex minimum
Stable heat profile tracking
Continuous 24/7 duty cycle
Rapid installation ROI
Food & Beverage

Food Roasting, Baking & Dehydration

Roasting ovens and drying towers require clean hot air. Our indirect heaters prevent flue gas contamination, ensuring food safety and compliance with international standards.

100% clean process air
Precise PLC temp control
FDA-grade metal exchangers
Replaces expensive LPG burners
Textile Mills

Steam Boilers & Textile Processing

Dyeing, washing, and finishing require high volume steam. Retrofitting automated pellet burners into existing oil-fired boilers delivers solid fuel prices without boiler replacements.

Retrofit directly to oil boiler
Automated pellet storage links
Stable steam pressure graph
Reduced ash discharge profile
Chemical Industry

Chemical Dryers & Ceramic Kilns

Chemical drying chambers and ceramic firing tunnels need constant and high temperature ranges. NDMI gasifier systems provide clean combustible gas to fire multi-point kilns.

Homogeneous kiln heating
Multi-nozzle burner gas lines
Heavy duty cycles
Low residue solid burnoff

Thermal Fuel Cost Savings Calculator

Select your current burner fuel and input your monthly consumption to calculate potential savings with NDMI Biomass Systems.

Configure Parameters

Calculated Savings

Estimated Monthly Savings
₹0.00
Estimated Annual Savings
₹0.00
Project Payback Period: 0 Months
Fuel Replacement Type: Biomass Wood Pellets
Get Detailed Project Report
*Calculations are estimates based on standard thermal conversion efficiencies. Actual results may vary based on fuel moisture and load modulations.

The Automated Heating Cycle

NDMI biomass systems eliminate manual handling through smart material conveyors and automated burners.

01

Pellet Storage

Biomass pellets are stored in a dry silo hopper, keeping the fuel fresh and free from operational contamination.

02

Auto Conveying

A smart screw auger feeds pellets into the burner nozzle based on thermal signals from the boiler sensors.

03

Combustion

Variable speed air blowers supply primary & secondary air, establishing high temp, smokeless vortex gasification.

04

Thermal Output

Stable hot gases pass into heat exchangers, transferring clean heat to process water, air, or steam lines.

Built For Industrial Reliability

We combine mechanical engineering precision with advanced PLC panels to provide trouble-free retrofits.

In-House Fabrication

We manufacture all systems within our own factory, implementing high-grade welds, materials, and checks.

Intelligent Automation

Burners utilize customized PLC code to monitor safety parameters, fuel flows, and automated shutoffs.

Extreme Heat Transfer

Custom geometries within combustor walls ensure thorough gas mixing, reaching up to 88% thermal utility.

24/7 Maintenance Hotline

Our engineering support is online continuously. We keep spare parts stocked and ready for rapid dispatches.

Multi-Stage Safety

Equipped with rotary airlocks, water sprinkler drops, and optical flames sensors to eliminate backfire risks.

Pan-India Commissioning

Our setup teams operate in all major manufacturing states, guaranteeing fast deployment and training.

Successful Installations

Real installations demonstrating instant operating opex reductions across different zones.

45% Saved Metal Forging Gasifier
Gujarat, India

5M Kcal Gasifier Setup

Replaced an expensive LPG fuel system at a high-volume metal forging plant. Achieved total project payback inside 7 months of continuous shifts.

40% Saved Coffee Hot Air Generator
Maharashtra, India

Indirect 2M Kcal Hot Air Generator

Delivered completely clean and food-grade heat to drying towers of a coffee processing corporation, ensuring pristine quality.

48% Saved Textile Boiler Retrofit
Ahmedabad, India

3TPH Steam Boiler Pellet Retrofit

Retrofit a diesel combustion nozzle on a 3-ton steam boiler with our automated burner. Slashed monthly expenses by half with seamless pressure graphs.

What Our Industrial Partners Say

Client opinions from factories that made the transition to NDMI biomass heating solutions.

"Retrofitting our forging furnaces with NDMI's biomass gasifiers slashed our diesel bills by 45%. The thermal output is highly consistent, and the payback period took just 7 months!"
A

Amit Patel

Operations Director, Precision Forgings

"The indirect hot air generator from NDMI provides clean process air with absolute zero contamination. Perfect for our coffee roasting setup, and it saved us 40% over LPG."
R

Rahul Deshmukh

Plant Manager, Maharashtra Agro-Foods

"We retrofitted our 3TPH steam boiler with NDMI's automated pellet burner. Steam pressure is rock solid, automation is seamless, and we save ₹4.8 Lakhs every single month!"
S

Suresh Mehta

CEO, Ahmedabad Textiles

Conventional Fossil Burners vs. NDMI Biomass Systems

A side-by-side technical evaluation highlighting economics, compliance, and convenience.

Parameters
Legacy Fossil Burners (LPG/Diesel)
NDMI Biomass Systems
Monthly Running Cost
High & Unpredictable
Slashed by 40% to 50%
Fuel Price Stability
Volatile (Linked to Crude Oil)
Stable (Local Agro-Market pricing)
Carbon Footprint
High CO2 emissions (Fossil)
Net Carbon Neutral (Biomass)
Smoke & Ash Emission
High Soot and NOx levels
Smokeless combustion vortex
Operation Convenience
High (Auto electric valve flow)
High (PLC Auto convey & ignite)
Average Cost / 10M Kcal
₹2,20,000 (Diesel)
₹1,15,000 (Pellets) - Save 47%!

Ready to Slash Your Thermal Fuel Bills?

Connect with our thermal combustion team today. We provide full retrofitting engineering layout plans, calculated ROI statistics, and test trials.

Request Consultation Estimate Savings
Get Quote